Skip to main content

Laser Lasermodul Punktlaser rot 650nm 1mW 3-12VDC

Product information "Laser Lasermodul Punktlaser rot 650nm 1mW 3-12VDC"

Punktlaser, rot, 650nm, 1mW, Laser Klasse 2, Fokus kollimiert, 3-12V DC, 9x20mm

The type LFD650-1-12(9x20) is a dot laser that projects a red laser dot. This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices or 12V vehicle power supply networks. The laser module has a controller electronic and just needs to be attached to a power supply. Caused by laser classification 2, no TÜV-registration is necessary. The laser can be applied e.g. in discotheque events and it can be mounted in tools without any problems. (The laser protective measures are still to be considered.)The power consumption of 25mA is really low. Accordingly, two batteries can be used for operation and the laser module can be used mobile. Typical operation areas are low cost applications. The working life of the laser module exceeds 3000h.You may use our battery pack with 2 x 1.5 volt batteries as power supply.

  • Operating Voltage 3-12V DC
  • Low cost
  • Laser Class 2
  • Compact size
  • Fixed focus
  • Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <4..5mm@5m
  • Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert
  • Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0°
  • Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich.
  • Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden.

Accessesories

Magnetic Mount for Lasermodul 12mm
Ø9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm
Magnetic Mount for Lasermodul 9mm
09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm
Bracket for Lasermodule 9mm
Ø9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm
Mount for Lasermodul 9mm
Ø9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm
Power supply 3V DC (1200mA)
Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC
Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO
certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development

Main Data

  • EAN: 4260129041308
  • Warranty: 1 years
  • Customs tariff number: 90132000000

Technical Parameters

  • Lifetime: > 3,000 h
  • Operating Temperature: -20°C - 40 °C
  • Storage Temperature: -40°C - 80 °C

Optical Parameters

  • Beam Shape: Dot
  • Optical Power: 1 mW
  • Laser Class: 2
  • Divergence: H - 1.0 mrad
  • Beam Diameter: 3 mm
  • Size of Laserdot: <4..5mm@5m
  • Operating Distance: 10 m
  • Optics: acryl lense
  • Laser technology: diode
  • Focus: collimated

Electrical Parameters

  • Operating Voltage: 3 - 12, typ 3 V DC
  • Operating Current: 15 - 30, typ 25 mA
  • Cable color positive: red
  • Cable color GND: black
  • Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max.

Mechanical Parameters

  • Size: Ø9x20 mm
  • Material: Brass
  • Cable length: 100 mm
  • Wire type: 26AWG, 0,14mm²
  • Output Aperture: 3 mm
  • Weight: 6 g

Buy LFD650-1-12(9x20) on Amazon
Optische Diodenleistung: 1 mW

Questions & Answers (0)


Want to ask a question about the product?

We're here to help! Your questions are valuable to us.

Cutsomers also bought

Tip
Laserfuchs linelaser, red, 650nm, 90°, 3-12V DC, Ø9x20 mm, focus 1m, class 1
Line lasermodule, red, 650nm, 5mW, 90°, class 1, focus 1m, 3-12V DC, 9x20mm The type LFL650-5-12(9x20)90 is a laser that projects a red laser line. This laser module emits light of the wavelength 650nm. The diode laser module measures 9x20mm. The fan angle of 90° generates a laser line of 2m length at a working distance of 1m. The operating voltage is 3 to 12 volts. This positioning laser is an universal tool for industry, hobby and trade. It reduces the effort that has to be put into positioning and alignment tasks. This module is laser class 1. Laser Class 1 Operating Voltage 3-12V DC Uniform line thickness Low cost Abstrahlcharakteristik: Linie, Liniendicke <1,2mm@1m Optische Leistung: Laserklasse 1; Fokus 1m Kompakte Bauform: 9x20mm; Öffnungswinkel: 90°; Achsabweichung: bis zu 3,0° Der Öffnungswinkel (90°) erzeugt, bei einem Arbeitsabstand von 1m, eine Laserlinienlänge von 2m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, in Industrie und Handwerk. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Netzteil Picotronic LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041001 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Line Optical Power: 5 mW Laser Class: 1 Divergence: H - 1.0 mrad Fan Angle: 90 ° Line Thickness: <1.2mm@1m Operating Distance: 1 m Optics: acryl lense Laser technology: diode Focus: fixed (1000mm) Electrical Parameters Operating Voltage: 3 - 12 V DC Operating Current: 10 - 25, typ 15 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 6 mm Weight: 6 g Stripping of wire: 5 mm Buy LFL650-5-12(9x20)90 on Amazon

€17.90*
Tip
Kreuzlaser Kreuz Laser rot 650nm 5mW 45° 3-12VDC
cross lasermodule, red, 650nm, 5mW, 45°, class 1, focus 1m, 3-12V DC, 9x20mm The type LFC650-5-12(9x20)45 is a laser that projects a red laser cross. This laser module emits light of the wavelength 650nm. The diode laser module measures 9x20mm. The fan angle of 45° generates a laser cross of 0.8m length at a working distance of 1m. The operating voltage is 3 to 12 volts. This positioning laser is an universal tool for industry, hobby and trade. It reduces the effort that has to be put into positioning and alignment tasks. This module is laser class 1. Abstrahlcharakteristik: Kreuz, Liniendicke <1,2mm@1m; Optische Leistung: 5mW (Laserklasse 1); Fokus 1m Kompakte Bauform: 9x20mm; Öffnungswinkel: 45°; Achsabweichung: bis zu 3,0°; Orthogonalität: 1° Der Öffnungswinkel (45°) erzeugt, bei einem Arbeitsabstand von 1m, eine Laserlinienlänge von 0,8m. Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik und dem Showbereich. Stromversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041247 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Cross Optical Power: 5 mW Laser Class: 1 Divergence: H - 1.0 mrad Fan Angle: 45 ° Line Thickness: <1.2mm@1m Operating Distance: 1 m Optics: acryl lense Laser technology: diode Focus: fixed (1000mm) Verticality: < ± 1 ° Electrical Parameters Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 10 - 30, typ 20 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 6 mm Weight: 6 g Buy LFC650-5-12(9x20)45 on Amazon

€20.90*
Bracket for Lasermodule 9mm
Laser holder with a height of 12 cm, also reducible to a height of 6 cm Bracket is adjustable in all degrees of freedom Material: aluminum rod and laser holder Baseplate: Plastic Flexible design Low cost Light weight Main Data EAN: 4260129041360 Customs tariff number: 90139080000 Technical Parameters Operating Temperature: -20°C - 40 °C Storage Temperature: -50°C - 50 °C Mechanical Parameters Material: Aluminium/Plastic Weight: 85 g

€32.90*
Laser Lasermodul Punktlaser rot 650nm 3.5mW 3-12VDC
Punktlaser, rot, 650nm, 5mW, Laser Klasse 3R, Fokus kollimiert, 3-12V DC, 9x20mm The type is a dot laser that projects a red laser dot. This diode laser module is distinguished by its high efficiency and its high lifetime of more than . The laser module has a controller electronic and just needs to be attached to a power supply (). This laser module can be operated without series resistor or control electronics. It can be simply attached to existing power supplies e.g. power supply units of small electrical devices or 12V vehicle power supply networks. A current of is drained. Typical operation areas are low cost applications. The laser module has fixed optics and can be used in light barriers, grade and slope control, or pointer applications. The temperature range of to enables the employment in many applications. The optical diode power of the laser module amounts to . Operating Voltage 3-12V DC Laser Class 3R Low cost Fixed focus Compact size Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <3..5mm@5m Optische Leistung: 5mW (Laserklasse 3R); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen und der Robotertechnik. Spannungsversorgung 3V bis 12V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Magnetic Mount for Lasermodul 12mmØ9mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 9mm Magnetic Mount for Lasermodul 9mm09mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 9mm Bracket for Lasermodule 9mmØ9mm(25x67) Halterung-Ballhead für Lasermodule mit Durchmesser 9mm Mount for Lasermodul 9mmØ9mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 9mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4260129041254 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 3.5 mW Laser Class: 3R Divergence: H - 1.0 mrad Beam Diameter: 2.5 mm Size of Laserdot: <3..5mm@5m Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: collimated Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 3 - 12, typ 3 V DC Operating Current: 5 - 15, typ 10 mA Cable color positive: red Cable color GND: black Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø9x20 mm Material: Brass Cable length: 100 mm Wire type: 26AWG, 0,14mm² Output Aperture: 2.5 mm Weight: 6 g

€12.90*
Dot laser, red, 650 nm, 1 mW, 3 V DC, Ø6x17 mm, Laser Class 2, Focus adjustable, Cable length 70 mm
Fokussierbarer Punktlaser, rot, 650nm, 1mW, Laser Klasse 2, Fokus einstellbar, 3V DC, 6x17mm The type is a dot laser that projects a red laser dot. The laser module emits light of the wavelength . This diode laser module measures x . Accordingly, it is a small and effective laser source. The optimal operation range of the laser is .You may use our battery pack with 2 x 1.5 volt batteries as power supply. This dot laser can be applied e.g. in laser levels, laser marking systems, robotics, and laser entertainment area. This module is laser class . The working life of the laser module exceeds . Operating Voltage 3 V DC Laser Class 2 Low power consumption Compact size Low cost Abstrahlcharakteristik: elliptischer Punkt, Punktgröße einstellbar Optische Leistung: 1mW (Laserklasse 2); Fokus einstellbar sehr kompakte Bauform: 6x17mm; Achsabweichung: bis zu 3,0° Für Anwendungen in z.B. Laserwasserwaagen, Lasermarkierungssystemen, der Robotertechnik, in Industrie, Handwerk, Hobby und dem Showbereich. Spannungsversorgung 3V. Zur Stromversorgung können Sie z.B. unser Picotronic Batteriepack 3V oder das Netzteil Picotronic LFNT-3 verwenden. Accessesories Mount for Lasermodul 06mmØ6mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 6mmØ6mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 6mm Magnetic Mount for Lasermodul 12mmØ6mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 6 mm Power supply 3V DC (1200mA)Netzteil, Ausgang: 3V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132004866 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -20°C - 40 °C Storage Temperature: -40°C - 80 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: H - 1.0 mrad Size of Laserdot: adjustable Operating Distance: 10 m Optics: acryl lense Laser technology: diode Focus: adjustable Electrical Parameters Potential of Housing: VDD(+) Operating Voltage: 2.7 - 3.3, typ 3 V DC Operating Current: 5 - 15, typ 10 mA Cable color positive: red Cable color GND: white Power Supply: Power Supply with stripped/tinned wires, Output: 3.3V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3.3W max. Mechanical Parameters Size: Ø6x17 mm Material: Brass Cable length: 70 mm Output Aperture: 3 mm Weight: 2 g Buy LFD650-1-3(6x17)-ADJ on Amazon

€10.90*
Dot laser red 650nm 1mW 5VDC - laser module for Arduino, Raspberry PI, ESP8266, ESP32, DIY electron…
Lasermodul, rot, 650nm, 1mW, Laserklasse 2, kompatibel mit Arduino, Raspberry Pi und ESP 8266 Boards Eye-safe laser module with 1mW power and a wavelength of 650nm. Specially developed for experimental setups and projects with Arduino, Raspberry Pi, ESP8266 and ESP32-Boards. The module can be directly connected with the socket strip of a microcontroller board through the 5V supply voltage and the pre-assembled connector pins. The laser is "active high" and can be operated pulsed with a TTL signal (5V) or in cw mode. Operating Voltage 5V DC Laser Class 2 Compact size Fixed focus Connectors for Arduino Raspberry PI ESP8266 and ESP32 Abstrahlcharakteristik: elliptischer Punkt, Punktgröße <3mm@1m Optische Leistung: 1mW (Laserklasse 2); Fokus kollimiert Kompakte Bauform:9x20mm; Achsabweichung: bis zu 3,0°, Modulierbar bis 200kHz Vorkonfektionierte Stecker für Anschluss an Mikrocontroller-Boards. Das Lasermodul ist kompatibel mit Arduino, Raspberry PI, ESP8266, ESP32 Für DIY-Elektronik-Projekte: Lichtschranke, Signalübertragung, Messtechnik, Laser-Projektor. Spannungsversorgung 5V Accessesories Magnetic Mount for Lasermodul 10mm10mm(48x86) MAGNETIC-MOUNT-PRO für Lasermodule mit Durchmesser 10mm Magnetic Mount for Lasermodul 12mmØ10mm(45x75) MULTI-MOUNT-MAGNETIC für Lasermodule mit Durchmesser 10mm Mount for Lasermodul 10mmØ10mm(45x75) MULTI-MOUNT für Lasermodule mit Durchmesser 10mm 5V Power supply 5V DC (1000mA)Netzteil, Ausgang: 5V DC, offene Kabelenden, Betriebsspannung: 100-240V AC Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO certified Laser Safety Eyewear PICO-LPG-635-660 according to DIN EN 207, suitable for red wavelengths >630 - 700 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications, Research and Development Main Data EAN: 4055132012229 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 3,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -20°C - 65 °C Optical Parameters Beam Shape: Dot Optical Power: 1 mW Laser Class: 2 Divergence: J - 2.0 mrad Size of Laserdot: <5 mm@1m, <1mm@0.5m Operating Distance: 0.5 m Optics: acryl lense Laser technology: Single Mode Diode Focus: fixed Electrical Parameters Max. Mod. Frequency: 200 kHz Operating Voltage: 4.5 - 5.5, typ 5 V DC Operating Current: 5 - 18, typ 10 mA Cable color positive: red Cable color GND: black Cable color modulation: yellow Power Supply: Power Supply with stripped/tinned wires, Output: 5V DC, Input: 100-240V AC, 50-60Hz, Output Power: 3W max. Mechanical Parameters Size: Ø10x26 mm Material: Brass Cable length: 250 mm Wire type: 26AWG, 0,14mm² Housing Color: brass Weight: 6 g Buy ARD-LASER-MDI650-1-5(10x26) on Amazon

€12.90*